26 AGF Test and Drain with ReliefReliability, Versatility, Code Compatibility
Note: It is important to note that the pressure rating of the relief valve indicates an operating range of pressure for both opening and closing of the valve.
Standard relief valves are required to oPeN in a range of pressure between 90% and 105% of their rating. the valves are required to CLoSe at a pressure
above 80% of that rating. the relief valve should be installed where it is easily accessible for maintenance. Care should be taken that the relief valve CANNot
be isolated from the system when the system is operational. A relief valve should NeVeR have a shutoff valve or a plug downstream of its outlet.
SS-M1011A_V001 · 06/13 TESTa n DRAIN® is a registered trademark of AGF Manufacturing Inc.
Model 1011ATESTa n DRaIn®
Sectional Floor Control Test and Drain Valve
for Systems Requiring Pressure Relief Valve
Complies with NFPA 13 and NFPA 13R Requirements •
Compact, Single-Handle Ball Valve •
Tamper-Resistant Test Orifice and Sight Glasses•
300 PSI rated.•
Specifiable orifice sizes: ³⁄• 8" (2.8K), 7⁄16" (4.2K), ½" (5.6K), 17⁄32" (8.0K), 5⁄8" (11.2K, ELO), ¾" (14.0K, ESFR), and K25
Relieves Excess System Pressure caused by Surges or Temperature Changes •
Shipped with Relief Valve and Bypass Drain Ports Plugged to Expedite Pressure Testing•
Locking Kit Available•
Repair kits are available for all TESTa n DRaIn® valves. Kit includes: Adapter Gasket (1), Ball (1), Valve Seats (2),
Stem Packing (1), and Stem Washer (1). Valve and orifice size must be specified when ordering.
The AGF Model 1011A TESTa n DRaIn® provides the test and express drain functions for wet fire sprinkler systems on
multi-story installations requiring pressure relief (NFPA 13 and NFPA 13R). The Model 1011A features a Model 7000 Pres-
sure Relief Valve with drain pipe.
The Model 1011A is available in a full range of sizes (¾" to 2") with NPT connections (BSPT available). The Model 7000
Pressure Relief Valve (UL/FM) features a flushing handle and a 175 PSI factory rating (other pressure ratings available).
Sizes:
¾"1"1¼"1½"2"
Dimensions
SIZE A B C D E F G H
¾"79⁄16"
(191 mm)
11⁄2"
(37.5 mm)
23⁄16"
(57 mm)
35⁄8"
(93 mm)
33⁄8"
(86 mm)
113⁄16"
(46 mm)
49⁄16"
(117 mm)
63⁄8"
(162.5 mm)
1"79⁄16"
(191 mm)
11⁄2"
(37.5 mm)
23⁄16"
(57 mm)
35⁄8"
(93 mm)
33⁄8"
(86 mm)
113⁄16"
(46 mm)
49⁄16"
(117 mm)
63⁄8"
(162.5 mm)
11⁄4"715⁄16"
(201 mm)
111⁄16"
(43 mm)
29⁄16"
(65 mm)
41⁄4"
(108 mm)
35⁄8"
(91 mm)
115⁄16"
(51 mm)
59⁄16"
(141 mm)
71⁄2"
(192 mm)
1½"815⁄16"
(227 mm)
113⁄16"
(45 mm)
31⁄4"
(81.5 mm)
51⁄16"
(127 mm)
37⁄8"
(99 mm)
25⁄8"
(67 mm)
81⁄4"
(207 mm)
107⁄8"
(274 mm)
2"815⁄16"
(227 mm)
113⁄16"
(45 mm)
31⁄4"
(81.5 mm)
51⁄16"
(127 mm)
37⁄8"
(99 mm)
25⁄8"
(67 mm)
81⁄4"
(207 mm)
107⁄8"
(274 mm)
*Available on 1¼" to 2" size units only • **Available on 1½" and 2" size units only
Approvals
UL and ULC Listed:
(EX4019 & EX4533)
FM Approved
NYC-BSA No. 720-87-SM
Job Name:__________________________________
Architect: ___________________________________
Engineer: ___________________________________
Contractor: _________________________________
USA Patent # 4741361 and Other Patents Pending
Materials
Handle ................Steel
Stem ...................Rod Brass
Ball ......................C.P. Brass
Body ...................Bronze
Valve Seat ...........Impregnated Teflon®
Indicator Plate ....Steel
Relief Valve .........Bronze
Bypass Fittings ...Brass
Bypass Tubing ....Nylobraid
Orifice Sizes
3⁄8", 7⁄16", ½", 17⁄32", 5⁄8" ELO*,
¾" ESFR*, and K25**
AGF Manufacturing Inc.
100 Quaker Lane, Malvern, PA 19355
Phone: 610-240-4900
Fax: 610-240-4906
www.testandrain.com
The Model 1011A provides the following…
From the 2013 Edition of NFPA 13
Chapter 8.16.2.4.1* Provisions shall be made to properly drain all parts of the system.
Chapter 8.16.2.4.2 Drain connections, interior sectional or floor control valve(s) –
& 8.16.2.4.3 shall be provided with a drain connection having a minimum
size as shown in Table 8.16.2.4.2.
Chapter 8.16.2.4.4 Drains shall discharge outside or to a drain capable of handling the
flow of the drain.
Chapter A.8.17.4.2 (Wet Pipe System) test connection is permitted to terminate into a
drain capable of accepting full flow… using an approved sight test
connection containing a smooth bore corrosion-resistant orifice
giving a flow equivalent to one sprinkler…
Chapter 8.17.4.2.2 The test connection valve shall be accessible.
Chapter 8.17.4.2.4 shall be permitted to be installed in any location… downstream of
the waterflow alarm.
Chapter 8.17.4.3.1 (Dry Pipe System) a trip test connection not less than 1" in
diameter, terminating in a smooth bore corrosion-resistant orifice,
to provide a flow equivalent to one sprinkler…
Chapter 8.17.4.3.2 The trip test connection… with a shutoff valve and plug not less
than 1", at least one of which shall be brass.
Chapter 7.1.2 - a wet pipe system shall be provided with a listed relief valve set
to operate at 175 PSI or 10 PSI in excess of the maximum system
pressure, whichever is greater.
Chapter 8.16.1.2.3* A listed relief valve of not less than ½" in size shall be provided on
the discharge side of the pressure-reducing valve set to operate at
a pressure not exceeding rated pressure of the system.
Chapter A.8.16.1.2.3 - consideration should be given to piping the discharge from the
(pressure relief) valve
Model 1011ATESTa n DRaIn®
Model 1011A 300 PSI Bronze Ball Valve, Model 7000 Pressure Relief Valve
Factory Rated at 175 PSI with other setting available
TO
DRAIN
TO
DRAIN
H
F
G
E
A
A
INLET
D
B
C
Model 1011A - Front View
Model 1011A - Plan View
TO
DRAIN
TO
DRAIN
H
F
G
E
A
A
INLET
D
B
C