The URL can be used to link to this page

10 CADDY Beam Clamp300 Universal Beam Clamp •Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 19 and 23) RS A F1 FT F2 TQ Material: Steel Part Number Rod Size RS Flange Thickness FT A Torque TQ Static Load 1 F1 Static Load 2 F2 Certifications Standard Packaging Quantity Finish: Plain 3000037PL 3/8"13/16" Max 1 1/8"5 ft lb 500 lb 250 lb cULus, FM 100 pc 3000050PL 1/2"13/16" Max 1 1/8"8 ft lb 950 lb 760 lb cULus, FM 50 pc 3000062PL 5/8"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc 3000075PL 3/4"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc 3000087PL 7/8"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc Finish: Electrogalvanized 3000037EG 3/8"13/16" Max 1 1/8"5 ft lb 500 lb 250 lb cULus, FM 100 pc 3000050EG 1/2"13/16" Max 1 1/8"8 ft lb 950 lb 760 lb cULus, FM 50 pc 3000062EG 5/8"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc 3000075EG 3/4"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc 3000087EG 7/8"13/16" Max 1 1/8"5 ft lb 950 lb 760 lb cULus 50 pc Setscrew must be tightened and torqued onto the sloped side of the I-beam. Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added. ANSI is a registered trademark of American National Standards Institute. FM is a registered certification mark of FM Approvals LLC, LTD. UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC. WARNING Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com and from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. © 2018 Pentair All rights reserved Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.