440 Highland Avenue_Spirit Halloween_2021_Sign PermitCity of Salem Sign Permit Application Worksheet
Zoning (res/non-res)BPD nonresidential
Entrance Corridor (Y/N)N
Lot frontage 670 feet
Building or tenant frontage 86 feet
# of businesses on site 3
Bldng dist from street center 280 feet
Multiplier 2.5
Building Signs
maximum area permitted 215.00 sq ft
total proposed sign area 120.00 sq ft
Sign 1 ("Spirit Halloween" Wall Sign)
area 120.00 sq ft
width 30 ft
height 4 ft
Freestanding Signs
maximum area permitted 125.00 sq ft (per side)
maximum # of signs permitted 1 signs
maximum height permitted 30.00 ft tall
Sign 2 (Pylon sign panel)
area 34.56 sq ft
width 9.6 ft
height 3.6 ft
overall height 12.5 ft tall
Application meets guidelines set forth in
the Salem Sign Ordinance Yes
Recommend approval Yes
Notes: The two proposed signs meet the dimensional standards of the Code
of Ordianances. The proposal is to install one banner wall sign, and one sign
panel on an existing pylon sign. Although the address is on Highland Ave,
the business is not in the Entrance Corridor Overlay because it lies more
than 150ft from the centerline of Highland Avenue.
5-Aug-21
Spirit Halloween
440 Highland Avenue
BANNER SIGN INSTALLATION SPECS
Banner sign Screws and anchors
as needed
Brick or Concrete
Wall
1.25” Fender Washer
Screw or
Toggle bolt
Screw or
Toggle bolt
6321 Huguenard Rd
1
1.25” Fender Washer
Installation Guide
For Wood use #6 coarse thread 3” screw and 1 1/4” diameter fender washer. Attach 3D sign to wall with screw and fender
washer through the plastic backer and into wall.
For sheet metal use 1“ sheet metal screw or self tapping with 1 1/4” diameter fender washer.
Use plastic anchor if needed.
For masonry use 1 3/4” tapcon with 1 1/4” diameter fender washer.
For EIFS use 6” toggle bolt with 1 1/4” fender washer.