126.5 Federal Street_CofNA_roofandskylightSalem Historical
Commission
98 WASHINGTON STREET, SALEM, MASSACHUSETTS
01970
(978) 619-5685
CERTIFICATE OF NON-APPLICABILITY
It is hereby certified that the Salem Historical Commission has determined that the proposed:
Construction Moving
x Reconstruction Alteration
Demolition Painting
Signage Other Work
as described below does not involve an exterior architectural feature or involves a feature covered by
the exemptions or limitations set forth in the Historic District's Act (M.G.L. Ch. 40C) and the Salem
Historic Districts Ordinance.
District: McIntire
Address of Property: 126 ½ Federal Street
Name of Record Owner: Joy and Scott Marchand Davis
Description of Work Proposed:
Roof Replacement
• Replace the water damaged and decaying roof over first-floor bay window
o Water-damaged shingles are irreparable and must be replaced
o No change in materials or design (red cedar shingles at a 5" exposure and
clapboard)
Skylight Replacement
• Replace leaking skylight
o Replace water damaged skylight with similar
o Repair the adjacent clapboard and asphalt roofing to prevent further damage
Not applicable due to being in-kind work or not visible from the public way.
*NOTE: Historic materials and details must be retained and repaired except where material is not
salvageable and must be replaced. If replacement is necessary, new elements must replicate existing
details, dimensions and materials. Should any changes to materials, design or outward appearance
be determined necessary, Applicant must submit a new application for review.
Upon completion of the above work, please notify Historical Commission staff as final
sign-off is required to document compliance with this Certificate and approved plans.
Dated: March 11, 2026 SALEM HISTORICAL COMMISSION:
By:
The homeowner has the option not to commence the work (unless it relates to resolving an
outstanding violation). All work commenced must be completed within one year from this date unless
otherwise indicated.
THIS IS NOT A BUILDING PERMIT. Please be sure to obtain the appropriate permits from the
Inspector of Buildings (or any other necessary permits or approvals) prior to commencing work.
Bay Window Exterior
Bay Window Exterior
Bay Window Exterior – View from Right
Skylight
Skylight View from Federal Street
Skylight Interior View
Skylight Interior View
FS A21 Product Data Sheet
Starting Production Code: 34AX08A
Description
General
FS - Fixed Deck Mounted Skylight, consisting of the following
integrated components – an interior condensation drainage
gasket, pre-finished white wooden frame, exterior maintenance
free aluminum cladding and counter flashing, corner keys, and a
insulating thermal pane glass unit with two seals, warm edge
spacer system, three coats of low e silver to increase visible
light transmittance while reducing solar heat. Primary seal
between glazing and cladding is a silicone based glazing
sealant. And lastly, the skylights are mounted to the roof deck
by fastening the continuous deck seal mounting system with
durable foam seal directly to the roof deck.
Variant FS xxx 200xB
Installation
Instructions
Installation Instructions included in every box and are listed at
www.VELUXusa.com or contact VELUX at 800-888-3589.
Installation instructions provided with each unit. VAS 452197
Applications Single unit and combi applications.
Orientation The skylight has a specific top and bottom and can not be
rotated.
Roof Pitch
0° - 10° Install with site built curb to elevate the pitch of the
glass to 14 degrees. Then install a VELUX ECB counter
flashing kit to create a water tight joint between the skylight and
the site built curb. Drawings and instructions are available on
the VELUXusa web
site.
14° - 85° Mount the skylight directly to the roof deck by
aligning and securing the continuous deck sealing mounting
system direclty
to the roof deck.
Under 20° Condensation drippage from the pane interior can be
expected.
Compatibility
Flashings
EDL - single unit installation with thin roofing material
(Shingles, Slates).
EKL - side by side and or over and under combinations with
thin roofing materials
EDW - single unit installation with high (tile) profile roofing
material
EKW - side be side and or over and under combinations with
high profiled (tile) roofing materials
EDM - single unit installation with metal roofing panels.
ECB - site build curb installations with roof pitch less than 14
degrees.
Interior
Accessories
Manual & Electric - Blackout blinds, Roller blinds, Venetian
Blinds. Solar - Blackout blinds, Roller blinds
FS A21 Product Data Sheet
Starting Production Code: 34AX08A
Materials
Wood
Ponderosa pine finished white in the factory or as a special
order, natural wood with a short term colorless wood
perservative . Stain
grade units are available as special order.
Cladding
Lacquered aluminum, neutral gray color with Kynar 500 top
finish
to prevent fading. 0.065mm thick.
Copper - untreated mill finish.
Special color cladding not available.
Glazing
Standard stocked glazing are type 04, 05, 06, 10. Contact
VELUX for stocked sizes of 06 & 10 glazings.
Consult with customer service for special glazing options and
delivery.
05 - A LoE3 double sealed insulated panes filled with warm
edge technology, stainless steel spacer, 95% Argon gas and
coated with three layers of microscopic silver particles to
increase thermal performance. This glazing in improved over
prior in that it allow in more visible light while blocking out
more solar heat gain (spectrally selective). Replaces type 75
comfort. Over all pane thickness is
17.2mm.
04 - LoE3 Laminated - All the benefits of the 05 LoE3 Glass
plus a laminated interior pane for safety and maximum
protection from both heat gain and fading with Neat coated
exterior. Replaces type
74 Comfort Plus. Over all pane thickness is 17.6mm. Laminate
06 - Impact - Laminated heat strengthened with tempered LoE3
with Neat coated exterior. Over all pane thickness is 18.2mm.
Laminate material is 0.90 PVB
08 - White laminated - Laminated heat strengthened with
tempered
LoE3. Same as 04 but a white inner layer. Over all pane
thickness is 17.6mm. Laminate material is 0.30 PVB.
10 - Snow load - Laminated tempered with tempered LoE3 with
Neat coated exterior. Over all pane thickness is 18.2mm.
Laminate material is 0.30
Gaskets
Patented engineered rubber gasket gaskets to prevent air
infiltration and water penetration. Primary seal at glazing and
cladding is silicone based glazing sealant.
Deck Seal
Mounting
Flange
Pre-engineered Deck Seal mounting system with a anti
corrosive coating. The Deck Seal mounting system is pre-
attached all the way around the perimeter of the skylight and
has a durable closed
cell foam that seals the skylight to the roof deck. Deck seal size:
1-1/4" up the frame and 1-1/4" away from the skylight frame.
Flange attached to roof decking with 1-1/4" ring shank nails
provided with
skylight unit.
FS A21 Product Data Sheet
Starting Production Code: 34AX08A
Sizes
Standard
Size
A06, C01, C04, C06, C08, C12, D26, D06, M02, M04,M06,
M08, S01
Special sizes Not available
Special color Special color cladding not available
Rough
Opening
Dimensions
Size Width Size Height
A06 14.1/2" D26 22 15/16"
C01, C04, C06, C08 21" C01, S01 26 7/8"
D25, D06 22 1/2" M02 30"
M02, M04, M06,
M08
30 1/16" C04, M04 37 7/8"
S01, S06
44 1/4"
A06 C06,
D06, M06,
S06
45 3/4"
C08, M08 54 7/16"
C12 70 1/4"
Certification
General
Hallmark certified, Florida Product approval. Exceeds
International Building Code (IBC), International Residential
Code (IRC) and
International Energy Conservation Code (IECC).
Air, water,
Structural
WDMA Hallmark Certification.
Architectural Testing Inc Code Compliant Research Report
CCRR
Thermal NFRC certified and labeled to Exceed Energy Star U-value and
Solar Heat Gain (SHGC) requirements for all climate zones.
Product
Warranty
Frame 10 years from the date of purchase, VELUX warrants that the
skylight will be free from defects in material and workmanship
Glass
20 years from the date of purchase, VELUX warrants that the
insulated glass pane will not develop a material obstruction of
vision due to a failure of the glass seal.
Accessories
5 years from the date of purchase, VELUX warrants that
VELUX blinds and control systems will be free from defects in
material and workmanship.
Installation
10 Years from the date of installation provided the skylight is
installed with the three layers of protection per the
manufactures
instructions.
Changes from
Earlier
Versions
Exterior N/A
Interior N/A
Type Sign Example FS C06 2004 01AR05A
Location Top left corner from out on the roof.
Other
Information
Features &
Benefits
FS Tested Performance Information
Glass Description
(VELUX Glazing
Code)
Laminated
(04)
Impact (06) White-
Laminated
(08)
Snowload (10) Laminated i89
(89)
Thermal Performance (All listed thermal performance values are NFRC certified)
U-Factor
(Btu/hr·ft2·°F)
0.43 0.42 0.43 0.41 0.37
SHGC 0.23 0.24 0.23 0.24 0.23
VT 0.54 0.55 0.49 0.54 0.54
UV Protection %
(300-380 nm)
99.9 99.9 99.9 99.9 99.9
Fading Protection %
Krochmann Damage
Function (300-600 nm)
83.1
84.6
88.4
83.2
85.1
Acoustical Ratings
STC
(Sound Transmission
Class)
32 n.r. 32 n.r. 32
OITC
(Outdoor-Indoor
Transmission Class)
27 n.r. 27 n.r. 27
Certified Air Infiltration/Exfiltration
CFM/ft2 0.01 0.02 0.01 0.11 0.01
Certified Water Resistance
Lbs/ft2 15 15 15 15 15
Certified Structural Performance (lbs/ft2)
Performance Grade or DP in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-17
Tested Size Negative Design Pressure - Uplift (Hurricane)
S06 70 50 70 65 70
M08 105 90 105 100 105
C06 n.r. n.r. n.r. 65 n.r.
Tested Size Positive Design Pressure - Download (Snowload)
S06 330 180 330 720 330
M08 240 200 240 640 240
C06 n.r. n.r. n.r. 1350 n.r.
Fall Protection Testing Results
Tested Size Testing is 200 lb sandbag dropped from indicated height to middle of glass
without glass breakage.
S06 1200 lbf-ft
(6' drop)
1200 lbf-ft*
(6' drop)
1200 lbf-ft*
(6' drop)
n.r. 1200 lbf-ft*
(6' drop)
M08 n.r. n.r. n.r. n.r. n.r.
Wind-Borne Debris Impact Ratings for Impact (06) Glazing
Tested Size Cycle
Pressure
(psf)
Missile Level Maximum
Wind Zone
Florida
Product
Approval
High Velocity
Hurricane Zone
S06 +/- 50 C 3 Yes No
M08 +/- 50 C 3 Yes No
04 glass: Tempered with LoE 366 over clear laminated heat strengthened (0.030" interlayer)
06 glass: Tempered with LoE 366 over clear laminated heat strengthened (0.090" interlayer)
08 glass: Same as 04, with white interlayer
10 glass: Tempered with LoE 366 over clear laminated tempered (0.030" interlayer)
89 glass: Same as 04, with i89 coating on interior laminated surface
* Indicates that the Laminated glass (04) test report should also cover this indicated glazing as it is equal to or stronger
than the Laminated glazing
n.r. = No report
3/28/2025