BERNADETTE SIGN PACKAGECity of Salem, MA August 15, 2024
SP-24-39
Sign Permit
Status: Active
Submitted On: 8/15/2024
Primary Location
65 WASHINGTON STREET Unit
C801 - RETAIL
SALEM, MA 01970
Owner
Shanna Chambers
Orchard Rd 6 6 Swampscott, MA
019 07
Applicant
Aaron Chambers
917-355-50 61
hello@settlersalem.com
2 Lynde Street
Salem, MA 01970
Property Owner
Is the applicant the owner?Is applicant representing City of Salem?
Property Information
The undersigned hereby applies for a permit to Erect/Alter/Repair a sign on the
following described buildings.
Select one: Erect/Alter/Repair Sign*
Erect
Special District(s)
Historic District
Zoning*
B5
Occupancy Type*
Commercial
Sign Owner
Is the Sign owner the same as the applicant?
Building Uses
1st Floor*
Other
1st floor Other Description*
Restaurant
2nd Floor
–
3rd Floor
–
4th Floor
–
Are there multiple businesses on the property?*
No
Frontage and Distance From the Street in Linear Feet
Building Frontage (ft)*
80
Property/Lot Frontage (ft)*
40
Distance From Street (ft)*
Less than 100 feet
Proposed Signs
How many signs are proposed?*
3
Are any of the proposed signs window signs with
vinyl or painted lettering?
Sign 1 Type*
Wall Sign
Sign 1 Materials*
Raw Steel
Sign 1 Dimensions: Height (ft)*
1.7
Sign 1 Dimensions: Width (ft)*
2.5
Sign 1 Area (sq ft)Will Sign #1 Require Electricity?*
Yes
Sign 2 Type*
Right Angle to Building
Sign 2 Materials*
Steel faces with aluminum bracket and
laser cut lettering
Sign 2 Dimensions: Height (ft)*
2
Sign 2 Dimensions: Width (ft)*
2
Sign 2 Area (sq ft)Sign 2 Height from ground to top of the sign (ft)
11
Will Sign #2 Require Electricity?*
Yes
Sign 3 Type*
Window Sign
Sign 3 Materials*
CNC cut vinyl lettering
Sign 3 Dimensions: Height (ft)*
2
Sign 3 Dimensions: Width (ft)*
1.5
Sign 3 Area (sq ft)
Sign 3 Height from ground to top of the sign (ft)
5
Will Sign #3 Require Electricity?*
No
4.25
4
3
Cost
Estimated Cost in Dollars of Net Work (fabrication
and installation)*
5000
Existing Signs
How many Existing Signs are on the Property?*
0
Sign Erector
Sign is a Municipal Owned Sign being installed by
Dept Public Services
Name*
Stuart Pitchel
DBA Telephone*
617.623.6222
Address*
236 Pearl Street Somerville, MA 02145
Email*
info@srpsigns.com
License Type License Expiration
–
Licensee Number License Status
Signature
Owner's Signature*
Shanna Chambers
Aug 15, 2024
BERNADETTE
SIGNAGE PLAN
65 WASHINGTON STREET
Washginton Street - Main Entrance Corner of Washington & Church Street
Washginton Street - Main Entrance Perpendicular to Residential Entrance - Washington St
AUGUST 2024
151"
28"
62"
115"
Facade - Washington Street
Type: Illuminated Box Sign
Lettering: Laser cut graphics/letters
Dimensions: 30" x 20"
Color: Dark/Aged Bronze
Materials: Raw Steel or Painted Aluminum
Distance Dimension: 1" - 3"
Electrical Requirements: Power circuit
located within the interior wall
Type: CNC cut vinyl lettering
Color: Off-White
Dimensions: 20" x 20 "
Material: Vinyl
30 "
20 "
48"
79"
24"
Side Door Details - Washington Street (Perpendicular to Residential Entrance)Residential Entrance - Perpendicular Entry / Emergency Exit
Type: CNC cut vinyl lettering
Dimensions: 20" x 15"
Color: Off-White
Materials: Vinyl
Additional Notes: The glass panel on door, and
central/lower window panels will have a Dusted Crystal
film applied - premium, 2-mil cast vinyl with an etched
look to create privacy and encourage entry through
the main entrance.
137"
175"
28
Type: Illuminated Double Sided Projecting/Blade Sign
Dimensions of Blade Circle Diameter: 24"
Overall Sign with Bracket: 28"
Materials: Raw Steel faces with aluminum bracket and
push through lettering
Distance Dimension: 1" - 3"
Electrical Requirements: Electrical enclosure inside
the interior of the unit with an low voltage wire running
through to the sign.
Corner - Church & Washington Street
65 Washington Street (Bernadette) Sign Lighting Details
These lighting details were shared through the viewpoint cloud application portal for 65
Washington Street on Tuesday, August 20, 2024.
Sign Lighting Details
[For] both the main entrance box sign and the blade sign, the lighting will be internal to the
signs, producing a "glowed" effect using LEDs. Both will be supported with a low voltage line.
The main sign LED will be concealed by a box behind the steel frame. The LED will be internal to
the blade, inside the steel faces illuminating the push out lettering.